
Indoor end of use equipment
Slim FCU
Features
Higher heat exchange rate
Lower noise with DC fan motor and anti-vibration foam
13cm of thickness with insulation added on both sides
Stable operation
Included thermostat control
Model |
KMFC-68SLDA |
KMFC-102SLDA |
|
Cooling Capacity |
kW |
3.95 |
5.90 |
Heating Capacity |
kW |
5.90 |
8.85 |
Fan Speed Adjustable Range |
RPM |
200-2200 |
|
Air Flow |
m³/h |
200-700 |
300-1100 |
Water Flow |
m³/h |
0.80 |
0.90 |
Water P.D. |
Kpa |
18 |
25 |
Power Input |
W |
15 |
20 |
Noise |
dB |
30-45 |
35-50 |
Weight |
kg |
18 |
23 |
Package Size |
mm |
1010*670*185 |
1290*670*185 |
Power Supply |
V/Hz |
190-250/ 50/60 |
190-250/ 50/60 |
Product Type |
/ |
2-pipe |
|
Product Components |
Condenser |
0.105 mm thickness aluminum fins, distance between fins is 1.2mm |
|
Condenser |
0.26 mm thickness, 7mm diameter, 42 copper tubes in 3 rows |
||
Drain Pan |
Steel sheet with 6mm insulation |
||
Panel |
0.8 mm hot zinc sheet metal with white spray |
||
Motor |
Low noise five speed DC fan motor |
||
Label |
Model label, wiring diagram, precautions, fan rotation logo, etc. |
||
Fan |
ABS material cross flow fan with low noise |
||
Production Technology |
Tube |
Mechanical expansion, automatic welding |
|
Drain Pan |
One-time molding |
||
Body Panel |
Fully automatic molding in one molding, with longitudinal reinforcement at the bend, and with high gloss spray surface treatment |
||
Motor Panel |
Hydraulic abrasive ribs+longitudinal reinforcement at the bend |
||
Inspection Standards |
No scratches or rust on the surface of the machine |
||
The internal cooler of the machine has no leakage under the pressure of 1.6Mpa |
|||
The unit starts under the condition of 90% of the rated voltage and runs stably for 10 minutes |
|||
Under normal temperature and humidity conditions, use 500V insulation resistance meter to measure the insulation resistance between the live part and non-metal live part of the unit is not less than 2MΩ. |
Note:
The model, parameters and performance will be changed due to the improvement of the product. The specific parameters are subject to the actual product and the nameplate.